New Kontur 90 Coldplastic road marking machine
Warszawa
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 532 82...
Show
+48 532 821 494
Poland, Warsaw
Poland, Warsaw
Poland, Warsaw
Poland, Warsaw
Poland, Warsaw
Poland, Rzeszow , Poland
Poland, Rzeszów
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Auction
United Kingdom, Leeds
The machine can apply flat and structured lines.
Kontur 90HP is a walk-behind type of machine. The hydraulic travel drive ensures infinitely variable travel speed. The marking unit is equipped with quick-release structured line applicators. Flat segment-and-gap lines are applied using a screed-box system. Cold plastic is mixed with hardener in the dynamic agitator immediately before applying marking lines. Hardener is dispensed automatically.
Plastic consumption depends on the marking type and structured line pattern and ranges from 1.5 to 6 kg/m2. The marking unit with an applicator and a glass bead gun is mounted on the right side of the machine.
Cleaning of the agitator and the applicator is controlled from the operator panel and requires minimal attention from the support workers.
Retroreflective glass beads are applied on the line directly during marking with an automatic glass bead gun through an adjustable diffuser.
Standard Configuration:
- Flat line marking unit, 1 pc. (Screed box size to be specified when ordering);
- Structured line marking unit, 1 pc. (Applicator size to be specified when ordering);
- Automatic glass bead gun;
- M21 marking control panel;
- Auxiliary machine control panel;
- Main component tank with a manual agitator;
- Hardener tank;
- Flushing liquid tank;
- Pneumatic and electric controls;
- Telescopic aiming device.
Options:
- Marking unit spotlight;
- Flashing light on a retractable rod;
- Screed boxes for flat lines and applicators for structured lines 10 to 25 cm wide.
Specification - Kontur 90HP
Engine type - Petrol
Engine power output, - 11,5kW
Engine power, - 16HP
Engine capacity, - 479 cm3
Compressor Piston
Maximum operating road gradient, - 20%
Maximum gradeability, - 30%
Transport speed, - 5km/h
Glass bead tank , - 17l
Glass bead tank, - 28kg
Pre-set programs - Up to 7
Marking material - Cold plastic
Maximum marking speed, - 5km/h
Marking material quantity, - 150kg
Hardener, - 10l
Flushing liquid, - 10l
Fuel tank capacity, - 7,5l
Oil tank capacity, - 39l
Lines applied simultaneously 1
Number of guns (applicators, extruders) 1
Single line width, - 100, 120, 150, 200, 240mm
Overall machine dimensions (L x W x H), m:
- Operating position 3,500 x 1,200 x 1,200
- Transport position 2,000 x 1,200 x 1,200
Dry weight, - 470kg
Unladen weight, - 530kg
Total weight, - 680kg