Haas HAAS Super Mini Mill machining centre






If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts




















Location: IT
Tool Stations: 31
Spindle Power: 11.2 kW
Table Load: 227 kg
Taper Size: BT 40
Condition: Showroom machine
Spindle nose to table: max 19.0 in / 483 mm; min 4.0 in / 102 mm
Spindle max torque: 22.0 ft-lbf @ 5000 rpm / 29.8 Nm @ 5000 rpm
Spindle drive system: Direct Speed, Belt Drive
Spindle bearing lubrication: Air / Oil Injection
Spindle cooling: Air Cooled
Table T-slot width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm
Table T-slot center distance: 4.33 in / 110 mm
Number of standard T-slots: 3
Max cutting feedrate: 833 ipm / 21.2 m/min
Rapids (X/Y/Z): 1200 ipm / 30.5 m/min
Max thrust (X/Y/Z): 2000 lbf / 8896 N
Tool changer type: Side-Mount Tool Changer (SMTC)
Tool changer capacity: 30+1
Max tool diameter (full): 2.5 in / 64 mm
Max tool diameter, large (adjacent empty): 5.0 in / 127 mm
Max tool length (from gage line): 7.00 in / 178 mm
Tool-to-tool (avg): 2.80 s
Chip-to-chip (avg): 4.20 s
Coolant capacity: 45 gal / 170 L
Air required: 4 scfm @ 100 psi / 113.0 L/min @ 5.5 to 6.9 bar
Inline air hose & coupler: 3/8 in
Input AC voltage (3 phase) - Low / High: 220 VAC (30 A) / 440 VAC (15 A)
Shipping dimensions: 90.0 in x 80.0 in x 99.0 in / 229 cm x 203 cm x 252 cm
Shipping weight: 4650 lb / 2109.2 kg