Trumpf Trumatic L3030 laser cutting machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Munich
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Ludwigsburg
Germany, Location:munich
Germany, Kaiserslautern
Location: DE
Laser Power: 3.2 kW
Supply voltage: 400 V
Phases: 3-phase AC
Rated power: 73 kVA
Rated current: 105 A
Maximum fuse protection: 125 A
Control voltage: 24 V DC
Control system: TASC3
Control software version: 2.4
100%: 3208 W
85%: 2756 W
75%: 2407 W
50%: 1610 W
25%: 810 W
10%: 328 W
5%: 157 W
1%: 0 W
Reflected RF power: 0.3 kW
Maximum CW RF amplitude: 100%
Switching frequency (CW): 50 kHz
Maximum pulse voltage: 10,000 V
Operating pressure limits: 20.01–27.00 kPa
Maximum turbine pressure: 200 hPa
Leakage rate: 0.04 hPa/min
Maximum CPU temperature: 49 °C
Actual CPU temperature: 43 °C
Maximum beam alignment time: 600 s
Spindle hours: 65,000 h
RIEDEL chiller (cooling system) (2001), Type: L 15/21 TR3
Nominal current: 42 A
Protection class: IP54
Refrigerant: R134a
Refrigerant charge: 11.5 kg
Maximum water pressure: 20.2 bar
Electrical
Control
Laser performance
CW mode power
Pulsed (5 kHz) power
100%: 3208 W
75%: 2416 W
RF/drive
Pressure and leakage
Thermal/CPU
Optics/Alignment
Hours
Additional equipment
Supply voltage: 400 V
Phases: 3-phase
Frequency: 50 Hz