Engel duo 8160H injection moulding machine
Trenčianske Stankovce
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+421 903 41...
Show
+421 903 414 374
Slovakia 
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
Slovakia, Trenčianske Stankovce
1,290 kg
Lifting height
5.5 m
Slovakia, Dunajská Lužná
Slovakia, Trenčianske Stankovce
1,600 kg
Lifting height
2.8 m
Slovakia, Banská Bystrica
5,000 kg
Lifting height
3.18 m
Poland, Oronsko
ENGEL duo 8160H/860W/1700 combi
Machine type: ENGEL duo 8160H/860W/1700 combi
Machine version: 2-component machine
Injection unit arrangement: H/W arrangement
one above the other
distance 300 mm
Clamping force: 17,000 kN
Min./max. mould height: 800 / 1,600 mm
Max. opening stroke: 2,550 mm
Max. platen distance: 3,350 mm
Rotary table diameter: 2,250 mm
Mould weight
DS: 30,000 kg
AS with rotary table: 21,590 kg
Total: 36,586 kg
AS without rotary table: 25,790 kg
Rotary table weight: 4,200 kg
Injection unit 1 / 3660H
Nozzle: hydraulic shut-off nozzle
Nozzle radius: R35
Nozzle bore: Ø8 mm
Screw diameter: 105 mm
Max. stroke volume: 4,070 cm³
Max. shot weight PC-ABS: 4,600 g
Max. shot weight PP: 3,700 g
Max. shot weight PA6 GF30: 5,500 g
Max. shot weight TPU: 4,960 g
Injection unit 2 / 500W
Nozzle: open nozzle
Nozzle radius: R35
Nozzle bore: Ø4 mm
Screw diameter: 50 mm
Max. stroke volume: 432 cm³
Max. shot weight TPV 55 Shore: 390 g
Max. shot weight EPDM 65 Shore: 483 g
Tie bars / platens
Tie-bar spacing horizontal: 1,850 mm
Tie-bar spacing vertical: 1,415 mm
Tie-bar diameter: 265 mm
Centring rings
Nozzle side: 1K Ø250 mm / 2K Ø200 mm
pitch 300 mm
Ejector side: Ø250 mm
Centring groove DS: 300 mm below nozzle centre
100 × 32H8
depth 18 mm
Ejector
Max. ejector stroke: 300 mm
Central ejector: without
Thread: M20
Ejector rod diameter: Ø50 mm
Limit monitoring connector: 4-pin
Core pullers
AS: 4× + 1× proportional valve
DS: 4× + 1× proportional valve
Core in: SKM13IR3 / alternative SKM10IR2
Core out: SKS13IR3 / alternative SKS10IR2
Limit monitoring connector: 16-pin according to Euromap 13
Valve gate control
Hydraulic: 16-fold / SKM10IR2 / SKS10IR2
Pneumatic valves
Ejector side: 1× blow function
Nozzle side: 1× blow function
Mould temperature control
Ejector side: 16 circuits
Nozzle side: 16 circuits
Machine-side water connection: Hasco N9
Tool-side water connection: USA system DME N9 / alternative N6
Mould heating
64 control zones
8 plugs for sensors and heating
16-pin
Robot / handling
Robot: ENGEL viper 60-RC 300
Travel Z: 3,320 mm
Travel X: 1,500 mm
Travel Y: 2,600 mm
C-axis: 210 Nm
B-axis: 210 Nm
Automation
Conveyor belt for parts deposit
Belt width: 1,600 mm
Light barrier
Special features
iQ weight control
Gas-assisted processing / blowing agent processing
Injection compression moulding
Cavity pressure sensors
MuCell prepared
not yet installed
Electrical data
Main connection A: 3×400V + N + PE / 50 Hz
Nominal current A: 0 A
Rating A: 250 kW
Main fuse A: 630 A
Short circuit current rating: 10,000 A
Control voltage: 230V AC / 24V DC
Main connection B
Nominal current B: 210 A
Rating B: 150 kW
Main fuse B: 250 A